Product specifications:
1. Output: 5V/8A, 6V/8A or 7.4V/8A (can be switched by jumper cap);
2. Input voltage: 7?25.5V (2-6 series lithium battery pack or 6-16 nickel-hydrogen/nickel-cadmium battery pack);
3. continuous output current: 8A;
4. Peak output current: 12A (duration no more than 15 seconds);
5. ripple: less than 35mVp-p (@8A/12V);
6. Dimensions: 45mm*22mm*7.5mm ((length * width * height);
7. Weight: 16g (including wire and magnetic ring).
Features:
1. Adopting advanced synchronous rectification switching power supply control chip design with overcurrent and overheat protection
Yes, the chip`s high efficiency is as high as 93%;
2. Small size and light weight;
3.The output current is large, the continuous output current capability is 8A, and the peak output current capability is 12A.
Certificate equipment electricity demand;
4. Using high-quality conversion chip, it greatly reduces electromagnetic interference and ensures normal operation of the receiver;
5. Has a wide voltage working range and can work normally within 7V-25.5V (low voltage version);
6. Has a working status indicator, which is lit when the output is normal;
Instructions
The input and output are shown in the figure above.
The voltage output enable port, when the enable jumper is plugged in, the voltage output is turned off, and when the enable jumper is removed, the voltage output is turned on.
Note: The jumper must be removed during normal operation, otherwise there will be no voltage output.
Package Included:
1 x HENGE 8A UBEC (Power input connector for optional)