RCDream 1/10 Wild-Defender RD110 4Door Pickup Body 324mm
Introduction:
The body is unassembled, which need to be assembled by self.
Materials:ABS+PC,Nylon
Wheelbase: 324mm
Body : 516*238*173mm (L*W*H)
For:TRX-4 324mm Crawler
G.W. : 1700g
DIM.:52*22*13cm
Note:
1. The product was shot in the studio, and the color may have deviation. Please refer to the real object!
2. The chassis is not included in this product!
Tips:
Although the Body can be equipped with the GRC V1.0 Interior , the V1.0 Interior is fixed to the Chassis, with small space reserved at the bottom, which is prone to interference and is not recommended. The Interior of the new GRC (RCDream) V2 is directly fixed to the Body, with more space reserved at the bottom for easier use!
RCDream`s Wild-Defender seriesBdoy is a universal GRC appearance decoration, which is also suitable for installing GRC wireless light sets!
The Hobbywing Axe Kit requires an additional DIY installation location!
Shows After assembly:
CamelYellow Body
Parts shows of body :
Other color shows:
TimeGrey Body
PolarBlue Body
RoverGreen Body
Preliminary work for Chassis before installation the body:(The chassis is not included!)
1. Remove the Origin body mounting Kit(front and rear), the original battery compartment and the original rear shock tower.
2. Install the front latch mounting , low center gravity battery compartment and rear shock tower of the RD110 Body parts onto the chassics!
The final status is shown below:
The battery compartment equipped of the kit can lower the center gravity of part of the crawler when placing the battery:
(Tips: You may need to use a strap to fix the battery. You need to prepare it yourself!)
The body is fixed in a quick-release structure. The front latch by a Push button and the rear latch is fixed by a Rotary button.
The multi-hole shock tower support of adjustable shock absorption angle and height can be installed with longer shock absorption or DIY double shock !
The front latchs are clipped into the latch mount, and the rear latch rotate inward to clamp the rails to fix the body!
The body onto the TRX-4 324mm Defender chassis :(The chassis is not included!)
When the interior is installed on the body:
The fixing method of the body with interior is still the quick-release structure.
The front latch by a Push button and the rear latch is fixed by a Rotary button.
Preliminary work for Chassis before installation the body:
1. Remove the Origin body mounting Kit(front and rear), the original battery compartment and the original rear shock tower.
2. Install the front latch mounting , low center gravity battery compartment and rear shock tower of the RD110 Body parts onto the chassics!
(Please refer to the installation instructions for other specific details!)
The front latchs are clipped into the latch mount, and the rear latch rotate inward to clamp the rails to fix the body!
Assembly on the TRX-4 chassis Shows:(The chassis is not included!)
The structural details of the replica car are shown as follows:
Cover can be opened
Scale the hood hinge
Scale the lock and unlock mode of real car mechanical key
Scale Hinge opening and closing mode of real car
Scale door panel and interior of real car
The rocker of the lifting glass can rotate
Scale the hood hinge and the opening and closing mode of the tailgate of the real car
Lamp holder is suitable for 5mm and 3mm straw hat lamp beads:
The lamp holder can also be adapted to the GRC SMD LED:
Tips:If your chassis has already been modified with a front mounted servo,
trim the protruding part of the front wheel cover to be compatible!
Upgrade the option part classic face kit #D1AFC1
Upgrade the option part 4D ExoCage #D1A15 / 4D Roof Rack #D1A16 :
Op parts :
324mm High Gloss RockBlack Flare
High Gloss RockBlack Hood :
High Gloss RockBlack Roof :
Mounted on the body: