Item: MonsterRC25 XI-2.5inch Frame
The body is composed of upper and lower carbon plates and high-strength injection molding rings. The appearance is very industrial, we have made additional enhancements to the circle, and now it has excellent performance in collision protection. The rack comes with high-strength injection molding protection ring, 915 antenna base, video antenna base, bare dog mount, insta 360 go mount and EVA protection strip
Parameters:
Wheelbase: 112mm
Internal height: 23mm
Upper plate hole position: 16mm/20mm/25.5mm/26.5mm
Bottom plate hole: 16mm/20mm/25.5mm
Motor installation: 9mm/12mm
Lens hole position: 20mm/19mm/14mm
Net weight: 61g
Upper plate thickness: 2.5mm
Recommend:
Motor: 1105-1606
Propeller: 2.5inch
Flight control: 25-26.5mm AIO integrated flight control
Battery: 2-4S 450mAh
Image transmission: nail shell or triangle image transmission
Camera: 19mm Maicro / 14mm Nano
Installation Notes:
1. The camera board needs to be inserted into the groove in front of the upper board and then fixed with 20mm aluminum nails (14mm or 19mm can be directly fixed with the printer without installing the carbon board)
2. After that, the flight control, motor and image transmission can be fixed on the upper board and the bottom plate in advance, and finally fixed with the circle (it is recommended to flip the flight control and fix it on the upper board, and the image transmission on the lower board; before installing the flight control Put on the battery tie first)
1. Carbon brazing board: The size of the camera board is optimized, the battery strap mounting port is widened, the central shaft hole of the motor mounting seat is enlarged, the chamfering process is optimized, and it is compatible with 26.5mm flight control mounting holes
2. Prints: The printing accuracy and quality of the prints are improved, the size of the prints is fine-tuned, and the installation process is no longer difficult. Added SMA antenna mount. The installation position of the tail black sheep antenna is slightly lowered to prevent the antenna from rising and the blades from scratching
3. Power lifting duct ring: using injection molding technology and new materials, it has both strength and toughness. Accuracy is greatly improved. Appearance is translucent black with smooth surface. Reduced weight compared to older printers
4. Aluminum column: use customized 705 aluminum column, the strength is greatly improved
Note: The delivery is in loose parts, you need to DIY assembly by yourself