Product Name: Micro flocking planting machine ( Fiber Grass Spread)
WARNING:
High-voltage product! ! ! CAUTION RISK OF ELECTRIC SHOCK! ! !
As the metal bars (net) in feeder box carrying high voltage , before adding fiber fluff or cleaning feeder box ,please make sure the power switch is turned off ,disconnect the adapter DC plug and the DC alligator clip from the product, and then open the feeder box, do not touch the metal bar by hand, in case of electric shock by product inner circuit residual voltage .
(Suggestion: After turning off the power, connect the ground wire to machine, use the metal part of alligator clip to touch the metal bar (net) of feeder box for about 5 seconds, then all the remaining voltage in the product circuit can be completely released.)
Product Features:
1. Product principle: The metal bar (net) in the plastic feeder box is positive side, the ground wire(with 3.5mmDC plug and alligator clip cord, following collectively refer to ground wire) connected to the object flocking surface is the negative side, which coated with adhesive. Internal circuit of the product generates high voltage, between the upper and lower plates form a high voltage electrostatic field .According to “Like charges repel each other, but opposite charges attract” basic rules,when you shake up and down the feeder box,affected by the high voltage electrostatic field , the nylon fibers with static electricity falling down vertically and at high speeds, spilled onto the adhesive surface , forming the shape of the fiber nylon fluff erected.
2. The product can be supplied by AC power adapter or DC9V laminated battery, control through a separate switch, easy to operate.
3.Product Configuration AC adapter, the adapter has wide voltage, high reliability, high efficiency, over current and short circuit protection functions.
4.With the humanization finger-curved shape design, the product handle is anti-skid and moderate size , grab more comfortable .
5. The feeder box comes with a bottom cover(2.5 * 2.5mm square holes and 4 * 4mm square holes) and a funnel-shaped bottom cover, apply for different grass lengths and different flocking area.If need a small area flocking, you can use the funnel-shaped bottom, better meet the demands of a variety of different craft flocking, a wider and more comprehensive usage.
6. The product comes with 1m alligator clip DC cable and 1m AC adapter wire, wider usage and more convenient .
7. The product designed for small objects flocking area, construction sand table model grass planting, toys backgrounds, all kinds of DIY scene and other grass flocking planting applications.
Precaution:
1.when it\`s time to clean the feeder box, it is recommended that you should use a long-bristled soft brush to clear the remaining fiber ,do not hit the box by hand or wipe with a wet towel or rinse with water.
2. Whilst installing the feeder box do not exceed to much force as it may result in deformation or damage the product.
3. You must use the original adapter otherwise it may affect the fiber planting results, and even lead to accidents. Do not use this product original adapter on any other products.
4. the product looks like a flashlight, not a toy, please keep it away from children, please do not play because of high voltage.
5. Please keep the product away from rain or moisture. Do not use or store in wet conditions or places with flammable gas or liquid.
6. To maintain maximum safety please cut off the power immediately if the product or adapter develops a fault, and ask a professional electrician repair it.
7. Please strictly follow the instructions and precautions to operate, do not demolish it, if the adverse consequences caused by improper operations, the manufacturer does not assume any responsibility.
Operation instruction:
1, Prepare work before using :( make sure the machine power switch is on the "OFF" position)
1),First spread the adhesive to model plate surface or attach the dual adhesive tape smoothly .
2),It should have necessary electrical connections between the ground wire with alligator clips and the surface of the model plate.
3),While adding the fiber , unscrew the feeder box clockwise, pour into fiber fluff then screw counterclockwise to tighten it ;
4),Connect the AC adapter,first plug 5.5mmDC port into the corresponding DC port in the product bottom, then plug AC adapter AC port into the AC100-240V ~ 50 / 60Hz power outlet;
2.Shift the product power switch to the "ON" position, then the green indicator light work, hand shake the feeder box up and down, and threw out the fluff fibers, then the fibers will be erected stick to the plate surface . (Note: while shaking , the box should be kept about 3 ~ 10cm above the surface of the plate.)
3.If use the battery-powered, first open the product battery cover , pull out the battery buckle, place a 9V battery (note polarity of the battery), then close the battery cover, push the power switch to "ON"file, then the green indicator light work, the following steps same as 2. A 9V battery (capacity 200mAH) can be used continuously for 3 to 4 hours.
4.When not in use,turn the power switch to "OFF" , the green indicator light goes off, and then unplug the adapter from the AC outlet.
5. Special Note: this product has circuit protection settings, which means the power switch the power switch only works after plugging the 3.5mm lead into the port located underneath the device.
Picture Show: