FUTABA T10J 2.4G Remotr Controller for R/C Model with R3008SB Receiver
Receiver supported by this remote
Main features
The new 10J 2.4 GHz adopts T-FHSS AIR system, supports two-way communication system, adds glider mode and multi-axis mode, and loads shaker and voice alarm function. Vibration prompt will appear at low voltage. This is the third remote controller 10J published by Futaba after 6J and 8J, with its special new receiver-R3008SB.
1. Built-in antenna, simple appearance
2. Support helicopter, fixed wing, multi-rotor, glider and other modes
3. Custom switch, you can set the function you want
4. LCD screen with backlight
5. Industry leading brands, high signal stability
¡ÜFollowing 6J and 8J, Futaba now publishes 10J, the third member of the "J" team. 10J follows the team`s image faithfully, not only in body lines, but also in hardware configuration. If there`s one area where it`s easier to identify differences, it`s the two high-brightness red/blue LEDs at the top of the panel. The other is that the control rocker is a high-level anti-skid multi-claw style (the same as the 10C series).
¡ÜCompared with the previous team models, the biggest difference of the newly released 10J is not only that the number of action channels is pushed to 10 channels, but also that it has modern two-way communication telemetry. Because of the new telemetry function, 10J`s 2.4 GHz communication adopts the new T-FHSS mode for the first time, and adopts a new 3000 series receiver; which is the special receiver-R3008SB.
¡ÜTip/Warning Voice Broadcasting Function (same as 14SG), Vibration Tip Function is optional
¡ÜIn addition to the functions of 6J and 8J for fixed-wing and helicopter classes, 10J for flight model has added glider classes and multi-rotor aircraft classes.
¡ÜWith 30 sets of model setting data memory, remote control can directly set SBUS servo, T-FHSS or S-FHSS mode can be freely selected.
Main configuration
Transmitter: FUTABA T10J
Receiver: R3008SB receiver (supporting 4.8-7.4V)
Instructions: English Instruction*1
Three-wire switch*1
Hand Change Metal Spring Chip*1
Warranty card *1
Plastic screwdriver*1
DJI Multi-Axis Package includes: Full set + throttle return (multi-axis only, fixed wing and helicopter are not applicable)
Helicopter/Fixed Wing/Multi-Rotor Compatibility
2.4 GHz bidirectional communication system (T-FHSS AIR mode or 10ch)
Alarm/Vibration (Battery, Mixed Control, Timing, Two-way Data)
10 Channel Software
S-FHSS receiver, such as 3008SB
Remote control distance: about 500 meters (depending on electromagnetic environment)
Handfeel: Weight about 636g
Packing size: 255mm long, 120mm wide and 260mm high
Display
Instruction manual
3008 Receiver
Three wire switch
Plastic screwdriver, Metal Spring Chip
Genuine packaging
Logistics size£º26cm × 26cm ×12 cm
Logistics weight:1.25 KG/piece